圣戈班TYGON3350鉑金硫化硅膠管的詳細資料:
產品優點:
圣戈班硅膠管TYGON3350,鉑金硫化工藝處理,蠕動泵管,泵管。 鉑金硫化硅膠管。半透明白色,印標為藍色。符合FDA 、USP、NSF-51、ISO10993、3-A等標準。超光滑內腔,減少吸附顆粒的可能性或細菌殘留。zui小的可萃取性,有助于維護液體傳輸?shù)耐暾?。憎水表面可以改善液體的流動性。持有符合ISO 10993標準生物適應性的證明文件。符合USP CLASS VI、FDA和NSF 51標準。
TYGON3350衛生級硅膠管采用一種鉑金硫化工藝,消除了其他硫化方法中經常遇到的萃取問題。它的另外一項特色是采用ISO 10993標準,能為用戶節省工藝確認的成本和時間,還提供加強管,可以承受更高的工作壓力。
TYGON鉑金硫化硅膠管涉及用于高純度場合,其超光滑內腔可以減少在輸送敏感液體時吸附顆粒和積聚微生物的機率。通過對其他硅膠軟管內表面的分析比較,TYGON鉑金硫化硅膠管比其他軟管光滑三倍。此外,光滑的流體通道有助于整個系統的清潔和消毒。
TYGON3350鉑金硫化硅膠管,常用作蠕動泵管,無菌灌裝、敏感液體(如注射用水)的輸送等。耐溫范圍為-51~+135℃。
可以蒸汽/射線/氣體滅菌。
產品規格:
貨號 | 英制(內×外×壁,英寸) | 公制(內×外×壁,毫米) |
ABW00001 | 1/32×3/32×1/32 | 0.8×2.4×0.8 |
ABW00002 | 1/16×1/8×1/32 | 1.6×3.2×0.8 |
ABW00003 | 1/16×3/16×1/16 | 1.6×4.8×1.6 |
ABW00004 | 3/32×5/32×1/32 | 2.4×4×0.8 |
ABW00005 | 3/32×7/32×1/16 | 2.4×5.6×1.6 |
ABW00006 | 1/8×3/16×1/32 | 3.2×4.8×0.8 |
ABW00007 | 1/8×1/4×1/16 | 3.2×6.4×1.6 |
ABW00009 | 5/32×7/32×1/32 | 4×5.6×0.8 |
ABW00011 | 3/16×1/4×1/32 | 4.8×6.4×0.8 |
ABW00012 | 3/16×5/16×1/16 | 4.8×8×1.6 |
ABW00013 | 3/16×3/8×3/32 | 4.8×9.6×2.4 |
ABW00014 | 3/16×7/16×1/8 | 4.8×11.1×3.2 |
ABW00016 | 1/4×5/16×1/32 | 6.4×8×0.8 |
ABW00017 | 1/4×3/8×1/16 | 6.4×9.6×1.6 |
ABW00018 | 1/4×7/16×3/32 | 6.4×11.1×2.4 |
ABW00019 | 1/4×1/2×1/8 | 6.4×12.7×3.2 |
ABW00022 | 5/16×7/16×1/16 | 8×11.1×1.6 |
ABW00023 | 5/16×1/2×3/32 | 8×12.7×2.4 |
ABW00027 | 3/8×1/2×1/16 | 9.6×12.7×1.6 |
ABW00028 | 3/8×9/16×3/32 | 9.6×14.4×2.4 |
ABW00029 | 3/8×5/8×1/8 | 9.6×16×3.2 |
ABW00032 | 7/16×9/16×1/16 | 11.2×14.4×1.6 |
ABW00033 | 7/16×5/8×3/32 | 11.2×16×2.4 |
ABW00036 | 1/2×5/8×1/16 | 12.7×16×1.6 |
ABW00037 | 1/2×11/16×3/32 | 12.7×17.6×2.4 |
ABW00038 | 1/2×3/4×1/8 | 12.7×19.1×3.2 |
ABW00045 | 5/8×13/16×3/32 | 16×20.8×2.4 |
ABW00046 | 5/8×7/8×1/8 | 16×22.4×3.2 |
ABW00053 | 3/4×1×1/8 | 19.1×25.4×3.2 |
ABW00062 | 1×1-1/4×1/8 | 25.4×31.8×3.2 |
ABW00069 | 1-1/4×1-1/2×1/8 | 31.8×38.2×3.2 |
ABW00074 | 1-1/2×2×1/4 | 38.2×50.8×6.4 |
3350 METRIC | ||
ABW1S1501 | 1×2×0.5 | |
ABW1S1502 | 2×4×1 | |
ABW1S1503 | 5×8×1.5 | |
ABW1S1504 | 6×9×1.5 | |
ABW1S1505 | 7×10×1.5 | |
ABW1S1506 | 8×12×2 | |
ABW1S1507 | 10×14×2 | |
ABW1S1508 | 12×16×2 | |
ABW1S1509 | 18×24×3 |
Food & Beverage Dispensing Tubing
The inner surface of Tygon SPT-3350 silicone tubing for food & beverage dispensing has been designed to reduce the risk of particle entrapment and microscopic build-up during fluid transfer. In-house analysis of the inner surface of Tygon SPT-3350 tubing compared to other silicone tubing shows that it is up to three times smoother. A smoother fluid path helps to facilitate complete sanitation of a fluid transfer system. Even in repeat use applications, Tygon SPT-3350 tubing may prevent residue build-up, aiding in complete cleaning and sterilization. Additionally, the smooth inner surface of the Tygon SPT-3350 silicone tubing improves fluid flow characteristics by reducing surface area.
In additina, in-house extractability tests have shown that Tygon SPT-3350 silicone tubing has a low extractable content. Lower extractable help to maintain the integrity of the transported food and beverage media.
Features and Benefits Typical Applications
-
Ultra-smooth inner bore reduces potential for particle entrapment
-
Minimal extractable help maintain fluid integrity
-
Excellent fluid flow characteristics
-
Complete inventory of standard sizes available, including metric sizes
Typical Applications
-
Food and beverage dispensing
Property | ASTM Method | Value or Rating |
---|---|---|
Tensile Strength @ 200% Elongation., psi (mpa) | - | 1450 |
Brittleness Temp. °F (°C) | - | -112 |
Durometer Hardness (Shore A), 15 Sec | - | 50 |
Maximum Recommended Operating Temp. °F (°C) | - | 204 |
Specific Gravity | - | 1.14 |
Tear Resistance Ib-f/in (kN/m) | - | 200 |
Tensile Set. % | - | — |
Ultimate Elongation | - | 770 |
Water Absorption, % 24 hrs. @ 23°C | - | 0.11 |
Regulation | |
---|---|
NSF-51 | |
3-A | |
FDA |
如果你對圣戈班TYGON3350鉑金硫化硅膠管感興趣,想了解更詳細的產品信息,填寫下表直接與廠家聯系: |